4WD Smart Robot Car ESP32 Camera Wifi Automation Kit

SPECIFICATIONS

Brand: KUONGSHUN

Bundle: ESP32 CAM SMART ROBOT CAR KIT

Condition: New

For Age: 8+

High-concerned chemical: None

Instructions Manual: Yes

Model Number: ESP32 CAM SMART ROBOT CAR KIT

Programmable Codes: Yes

State of Assembly: Unassembled Kit

Type: Module

is_customized: Yes

4WD Smart Robot Car ESP32 Camera Wifi Automation Kit For Arduino Programming ESP Robot with Antenna Learning Complete Coding Kit

✔ESP32 Wifi Camera.  ✔Live Video. ✔Wifi Network.  ✔Easy to Assembly.

Explanation:
Imagine if you had a robot that had a camera on board and could be controlled via the Internet. It opens up so many opportunities to use it. For example, you can send the robot into the kitchen to check if you accidentally left the kettle on the stove! I found it can be done easily with ESP32-CAM. The ESP32-CAM is a very small camera development board with an ESP32-S chip, an OV2640 camera, microSD card slot and several GPIOs for connecting peripherals. OV2640 is a 1/4 inch CMOS UXGA (1632*1232) image sensor.
The sensor's small size and low operating voltage provide all the features of a single UXGA camera and image processor.

1. Low power dual core 32 bit CPU for application processors.
2. Main frequency up to 240MHz, processing power up to 600dmips.
3.Internal 520 KB SRAM, external 4M PSRAM.
4. Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC.
5. Support OV2640 and OV7670 cameras, built-in flash. Support image WiFi upload.
6. Support TF card. 7. Support multiple sleep modes.
8. Embedded Lwip and free RTOS.
9. Support STA/AP-/STA + AP- working mode.
10. Support smart configuration/AirKiss one-click distribution network.
11.Promote secondary development.